Snapshot@2021_0904_063743.jpg
Snapshot@2021_0904_063403.jpg
Snapshot@2021_0904_062707.jpg
Snapshot@2021_0904_062126.jpg
Snapshot@2021_0904_061856.jpg
Snapshot@2021_0904_061523.jpg



pigmentlogo.jpg







# Image, Once you have, turn off the water, and then dried, voila.
# This step, performed several times, to adjust the image quality, finish.

# To negative film, but you need a dark room ...
# On a PC, it is possible that the negative film, made with ink-jet printing output.
# Thus, no longer cumbersome darkroom work,
# All, you can work in a bright room.
Since # pigmented photosensitive solution is changed in light and temperature,
# The storage, need a refrigerator.


















# Image, Once you have, turn off the water, and then dried, voila.
# This step, performed several times, to adjust the image quality, finish.
# To negative film, but you need a dark room ...
# On a PC, it is possible that the negative film, made with ink-jet printing output.
# Thus, no longer cumbersome darkroom work,
# All, you can work in a bright room.
Since # pigmented photosensitive solution is changed in light and temperature,
# The storage, need a refrigerator.
ADSEN.jpg
gld-042.jpg
2021/09/04(土) 17:43 UNARRANGEMENT PERMALINK COM(0)









# Shooting with color reversal film. From the film, create a magnifying negative.
Mixture of pigment and photosensitizer on printing paper, plastic paper,
Roughly spray. After drying, overlay the magnifying negative and use the UV exposure machine,
Burn. Then wipe with tap water, sponge, etc.
An image appears. It is dry and one step is completed.
Repeat this process, replacing the pigment with C ・ M ・ Y ・ B.
For this print, I used C, M, Y photosensitizers.














1



# Shooting with color reversal film. From the film, create a magnifying negative.
Mixture of pigment and photosensitizer on printing paper, plastic paper,
Roughly spray. After drying, overlay the magnifying negative and use the UV exposure machine,
Burn. Then wipe with tap water, sponge, etc.
An image appears. It is dry and one step is completed.
Repeat this process, replacing the pigment with C ・ M ・ Y ・ B.
For this print, I used C, M, Y photosensitizers.




2021/09/04(土) 01:30 UNARRANGEMENT PERMALINK COM(0)